Welcome Guest, you are in: Login

wiki.crowe.co.nz

RSS RSS

Navigation





Search the wiki
»

PoweredBy

Rainsensors com Serial port

RSS
Modified on Tuesday, 29 November 2011 07:59 by Administrator Categorized as Uncategorized

START_RDM_SETUP
' Rain Gage
'
' GUIDELINES FOR USE
' Comments begin with a semicolon.  Extra spaces, tabs, and blank lines are ignored.
' Note that this file must correspond to the transmission protocol
' used in thd Device Under Test (DUT)

START_NOTES SW011 Lens Bd END_NOTES

' COM_PROTOCOL ' SINGLE FRAME means that each frame starts with a character s, ' followed by registers values (0-255) each transmitted as two bytes of ' ascii-hex. (e.g. decimal 42 would hex 3E, so this is transmitted as ascii 3, then E. ' The frame terminates when all the registers have been transmitted. COM_PROTOCOL SINGLE_FRAME

' SAMPLE_PER = Sample Period. Time between frames, in seconds. SAMPLE_PER 0.20

' Weight nominally 100. Adjust this in saved RDM data files to weight the data more or ' less heavily in an optimization. WEIGHT 100

EMCAL ' A board parameter. Emitter Level when the board under test is placed in a new lens. LENS_WEAR ' 1 = Out of box new, 10 = as scuffed as we can live with

BAUD 1200

' AWAKE AwakeRegIndex AwakeThreshold AwakeFrames DefaultLogInterval. ' When logging data files, skips frames if there is inactivity. ' Other acquisition modes are not affected. ' If the value of the register given by RegIndex is over Threshold, it will stay away for for WakeFrames. ' If this keyword is absent, it will not go to sleep. ' If any of the USB data acquisition bits change state, it will also wake up. ' It will always log one frame every DefaultLogInterval frames, even if nothing wakes it up. . This will make it wake up to log if PeakRS exceeds 12. It will log for 1 minute. ' Absent anything to wake it up, it will log one data point each 10 minutes. AWAKE 0 12 300 3000

' The RDM_DISP_REG values select what is displayed. The RDM program itself will overright ' this list of indexes as the user selects to store the display selections. RDM_DISP_REG 0 1 2 3 4

' TRANSMITTED REGISTERS ' REG_NAME MyRegName OptionalLowerLim OptionalUpperLim ' A list of the transmitted registers, in the order in which they are transmitted. ' The first of these is condidered index 0, the second index 1, and so on. ' Add register names using either of these keywords: REG_NAME or retlw ' ' NAMED BITS must immediately follow the register they correpond to: ' NAMED_BIT MyBitName BitPosition (0 = LSB)

REG_NAME PeakRS 0 5 ' 0 REG_NAME SPeakRS 0 5 ' 1 REG_NAME RainAD8 64 192 ' 2 REG_NAME LRA ' 3 REG_NAME TransRat 60 170 ' 4 REG_NAME AmbLNoise ' 5

REG_NAME RGBits ' 6 NAMED_BIT PkOverThr 0 NAMED_BIT Raining 1 NAMED_BIT Out1On 2 NAMED_BIT HtrOn 3 NAMED_BIT IsDark 4 NAMED_BIT Cndnstn 5 NAMED_BIT Freeze 6 NAMED_BIT Storm 7

' SLOWLY TRANSMITTED REGISTERS, IF THEY EXIST ' The DUT may also transmit register values slowly, for registers that do not ' change frequently. If this feature is used, put keyword here ' SLOW_REG_INDEX and SLOW_REG_VALUE in the transmission order they correspond to. ' The SLOW_REG_INDEX will cyle through 0,1, 2... up to the highset index of ' SLOW_REG_NAME transmitted. The SLOW_REG_VALUE transmits the value. SLOW_REG_INDEX ' 7 SLOW_REG_VALUE ' 8

SLOW_REG_NAME RevLevel 11 11 ' 0 SLOW_REG_NAME EmLevel 30 80 ' 1 SLOW_REG_NAME RecEmStr 60 66 ' 2 SLOW_REG_NAME ABLevel 10 10 ' 3 SLOW_REG_NAME TmprtrF 70 100 ' 4 SLOW_REG_NAME PUGain 34 39 ' 5 SLOW_REG_NAME ClearTR 60 170 ' 6 SLOW_REG_NAME AmbLight ' 7 SLOW_REG_NAME Bucket ' 8 SLOW_REG_NAME Barrel ' 9 SLOW_REG_NAME RGConfig ' 10 SLOW_REG_NAME DwellT ' 11 SLOW_REG_NAME SinceRn ' 12 SLOW_REG_NAME MonoStb ' 13 SLOW_REG_NAME LightAD 120 136 ' 14 SLOW_REG_NAME RainThr ' 15

' USB DATA ACQUISITION ' Based on USB adapter by DLP Designs. Model DLP-IO8-G ' If one or more of these keywords is present, then the RDM will know USB data acquisition exits. ' MON_DIG_CH ChannelNumber ' Reead the digial channal value each time it reads the serial buffer. ' Values: ' 0 = Port was not open / 15 = Was low at any time during frame / 241 = Was high entire time during frame MON_DIG_CH 1

END_RDM_SETUP

ScrewTurn Wiki version 3.0.4.560. Some of the icons created by FamFamFam.